Perancangan Sistem Kendali Mesin CNC (Computer Numerical Control) laser Cutting CO2 2 Axis Berbasis Arduino Uno

Authors

  • Bayu Lesmana Stt wastukancana purwakarta
  • Ghany Heryana Sekolah Tinggi Teknologi Wastukancana
  • Jatira Sekolah Tinggi Teknologi Wastukancana

DOI:

https://doi.org/10.31884/jamet.v2i2.43

Keywords:

sistem kendali, mikrokontroler, laser cutting, software

Abstract

The machining industry, especially machine tools, is currently facing increasingly difficult challenges because this industry is required to produce inexpensive, precise products and fast production times. guaranteed 1/100 mm more and can produce products efficiently. The research to be carried out aims to design control of a CO2 laser cutting machine. So that the machine can work automatically with the control system using the Arduino Uno microcontroller and can run the g-code program with precision and be able to form certain patterns or designs. This laser cnc machine also has several important components including motor drivers, stepper motors, arduino microcontrollers and cnc shields. The operation of this machine uses the ligtburn software. The machine workflow includes a PC (personal computer), g-code, lightburn, driver which will then produce output on the machine in the form of automatic movement.

References

Heryana, G. (2018). Analisa counting system dengan 2 pilihan program produk pada proses spot welding di pt. Summit adyawinsa indonesia. In Seminar Nasional Teknik Elektro (Vol. 3, No. 2, pp. 278-282).

Mangkusasmito, F., & Nugroho, T. H. (2019). Desain Sistem Kendali Umpan Balik State Pada Kasus Kontinyu Untuk Meja Kerja Cnc. Gema Teknologi, 20(2), 32-40.

AZMI, F., Wanggara, A., Andree, A., Moris, M., & Simatupang, P. G. (2020). Rancang Bangun Mesin CNC Engraving 3 Axis Berbasis Arduino Uno Dengan GRBL Software. Journal Of Electrical And System Control Engineering, 4(1), 11-17.

D. A. Maulida, F. Dionisius, dan Rachmatullah. Rancang Bangun Dropping Kontrol Tetesan Infus Dengan Sistem Telemetri Berbasis Android. Journal of Applied Mechanical Technology, 1(1): p. 22-28.

M. A. Amat dan M. Luthfi. Teknik Pemrosesan Gambar Digital Pada Hasil Pengelasan TIG Aluminum Paduan Untuk Aplikasi Pengukuran Lebar Manik Las. Journal of Applied Mechanical Technology, 2(1): p. 10-18.

Heryana, G. (2018). Analisa Kegagalan Pembacaan Jumlah Titik Pada Spot Welding Dan Solusinya Secara Otomasi Di PT. Summit Adyawinsa Indonesia. In Seminar Nasional Teknik Elektro (Vol. 3, No. 1, pp. 49-54).

TB. U. A. Subekhi, G. Heryana, D. A. Rajab, dan Nizarudin. Rancang Bangun Mesin Pencacah Nangka Muda Sebagai Bahan Produksi Makanan Megono. Journal of Applied Mechanical Technology, 2(1): p. 1-9.

Downloads

Published

2023-11-30

How to Cite

[1]
B. Lesmana, G. Heryana, and Jatira, “Perancangan Sistem Kendali Mesin CNC (Computer Numerical Control) laser Cutting CO2 2 Axis Berbasis Arduino Uno”, JAMET, vol. 2, no. 2, pp. 28–33, Nov. 2023.

Issue

Vol. 2 No. 2 (2023): Journal of Applied Mechanical Technology (JAMET)

Section

Articles

License

Copyright (c) 2023 Journal of Applied Mechanical Technology

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.